Validation of the OptiSafe™ eye irritation test.

PURPOSE: OptiSafe is an in chemico test method that identifies potential eye irritants based on macromolecular damage following test chemical exposure. The OptiSafe protocol includes a prescreen assessment that identifies test chemicals that are outside the applicability domain of the test method and thus determines the optimal procedure. We assessed the usefulness and limitations of the OptiSafe test method for identifying chemicals not requiring classification for ocular irritation (i.e. bottom-up testing strategy). MATERIALS AND METHODS: Seventeen chemicals were selected by the lead laboratory and tested as an independent study. Ninety-five unique coded chemicals were selected by a validation management team to assess the intra- and interlaboratory reproducibility and accuracy of OptiSafe in a multilaboratory, three-phased validation study. Three laboratories (lead laboratory and two naïve laboratories) evaluated 35 chemicals, with the remaining 60 chemicals evaluated by the lead laboratory only. Test method performance was assessed by comparing classifications based on OptiSafe results to classifications based on available retrospective in vivo data, using both the EPA and GHS eye irritation hazard classification systems. No prospective in vivo testing was conducted. RESULTS: Phase I testing of five chemicals showed that the method could be transferred to naïve laboratories; within-lab reproducibility ranged from 93% to 100% for both classification systems. Thirty coded chemicals were evaluated in Phase II of the validation study to demonstrate both intra- and interlaboratory reproducibility. Intralaboratory reproducibility for both EPA and GHS classification systems for Phase II of the validation study ranged from 93% to 99%, while interlaboratory reproducibility was 91% for both systems. Test method accuracy for the EPA and GHS classification systems based on results from individual laboratories ranged from 82% to 88% and from 78% to 88%, respectively, among the three laboratories; false negative rates ranged from 0% to 7% (EPA) and 0% to 15% (GHS). When results across all three laboratories were combined based on the majority classification, test method accuracy and false negative rates were 89% and 0%, respectively, for both classification systems, while false positive rates were 25% and 23% for the EPA and GHS classification systems, respectively. Validation study Phase III evaluation of an additional 60 chemicals by the lead laboratory provided a comprehensive assessment of test method accuracy and defined the applicability domain of the method. Based on chemicals tested in Phases II and III by the lead laboratory, test method accuracy was 83% and 79% for the EPA and GHS classification systems, respectively; false negative rates were 4% (EPA) and 0% (GHS); and false positive rates were 40% (EPA) and 42% (GHS). Potential causes of false positives in certain chemical (e.g. ethers and alcohols) or hazard classes are being further investigated. CONCLUSION: The OptiSafe test method is useful for identifying nonsurfactant substances not requiring classification for ocular irritancy. OptiSafe represents a new tool for the in vitro assessment of ocular toxicity in a tiered-testing strategy where chemicals can be initially tested and identified as not requiring hazard classification.

United States regulatory requirements for skin and eye irritation testing.

PURPOSE: Eye and skin irritation test data are required or considered by chemical regulation authorities in the United States to develop product hazard labelling and/or to assess risks for exposure to skin- and eye-irritating chemicals. The combination of animal welfare concerns and interest in implementing methods with greater human relevance has led to the development of non-animal skin- and eye-irritation test methods. To identify opportunities for regulatory uses of non-animal replacements for skin and eye irritation tests, the needs and uses for these types of test data at U.S. regulatory and research agencies must first be clarified. METHODS: We surveyed regulatory and non-regulatory testing needs of U.S. Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) agencies for skin and eye irritation testing data. Information reviewed includes the type of skin and eye irritation data required by each agency and the associated decision context: hazard classification, potency classification, or risk assessment; the preferred tests; and whether alternative or non-animal tests are acceptable. Information on the specific information needed from non-animal test methods also was collected. RESULTS: A common theme across U.S. agencies is the willingness to consider non-animal or alternative test methods. Sponsors are encouraged to consult with the relevant agency in designing their testing program to discuss the use and acceptance of alternative methods for local skin and eye irritation testing. CONCLUSIONS: To advance the implementation of alternative testing methods, a dialog on the confidence of these methods to protect public health and the environment must be undertaken at all levels.

High-content screening in zebrafish embryos identifies butafenacil as a potent inducer of anemia.

Using transgenic zebrafish (fli1:egfp) that stably express enhanced green fluorescent protein (eGFP) within vascular endothelial cells, we recently developed and optimized a 384-well high-content screening (HCS) assay that enables us to screen and identify chemicals affecting cardiovascular development and function at non-teratogenic concentrations. Within this assay, automated image acquisition procedures and custom image analysis protocols are used to quantify body length, heart rate, circulation, pericardial area, and intersegmental vessel area within individual live embryos exposed from 5 to 72 hours post-fertilization. After ranking developmental toxicity data generated from the U.S. Environmental Protection Agency's (EPA's) zebrafish teratogenesis assay, we screened 26 of the most acutely toxic chemicals within EPA's ToxCast Phase-I library in concentration-response format (0.05-50 µM) using this HCS assay. Based on this screen, we identified butafenacil as a potent inducer of anemia, as exposure from 0.39 to 3.125 µM butafenacil completely abolished arterial circulation in the absence of effects on all other endpoints evaluated. Butafenacil is an herbicide that inhibits protoporphyrinogen oxidase (PPO)--an enzyme necessary for heme production in vertebrates. Using o-dianisidine staining, we then revealed that severe butafenacil-induced anemia in zebrafish was due to a complete loss of hemoglobin following exposure during early development. Therefore, six additional PPO inhibitors within the ToxCast Phase-I library were screened to determine whether anemia represents a common adverse outcome for these herbicides. Embryonic exposure to only one of these PPO inhibitors--flumioxazin--resulted in a similar phenotype as butafenacil, albeit not as severe as butafenacil. Overall, this study highlights the potential utility of this assay for (1) screening chemicals for cardiovascular toxicity and (2) prioritizing chemicals for future hypothesis-driven and mechanism-focused investigations within zebrafish and mammalian models.

High-content screening assay for identification of chemicals impacting spontaneous activity in zebrafish embryos.

Although cell-based assays exist, rapid and cost-efficient high-content screening (HCS) assays within intact organisms are needed to support prioritization for developmental neurotoxicity testing in rodents. During zebrafish embryogenesis, spontaneous tail contractions occur from late-segmentation (∼19 h postfertilization, hpf) through early pharyngula (∼29 hpf) and represent the first sign of locomotion. Using transgenic zebrafish (fli1:egfp) that stably express eGFP beginning at ∼14 hpf, we have developed and optimized a 384-well-based HCS assay that quantifies spontaneous activity within single zebrafish embryos after exposure to test chemicals in a concentration-response format. Following static exposure of one embryo per well from 5 to 25 hpf, automated image acquisition procedures and custom analysis protocols were used to quantify total body area and spontaneous activity in live embryos. Survival and imaging success rates across control plates ranged from 87.5 to 100% and 93.3-100%, respectively. Using our optimized procedures, we screened 16 chemicals within the US EPA's ToxCast Phase-I library, and found that exposure to abamectin and emamectin benzoate-both potent avermectins-abolished spontaneous activity in the absence of gross malformations. Overall, compared to existing locomotion-based zebrafish assays conducted later in development, this method provides a simpler discovery platform for identifying potential developmental neurotoxicants.

High-content screening assay for identification of chemicals impacting cardiovascular function in zebrafish embryos.

Targeted assays are needed to better evaluate effects of chemicals on organogenesis and begin classification of chemicals by toxicologically relevant modes-of-action. Using transgenic zebrafish (fli1:egfp) that stably express eGFP within vascular endothelial cells, we have developed and optimized a 384-well-based high-content screening (HCS) assay that enables us to screen and identify chemicals affecting cardiovascular function at sublethal, nonteratogenic concentrations. Following static exposure of one embryo per well from 5 to 72 h postfertilization (hpf), automated image acquisition procedures and custom image analysis protocols are used to quantify body length, circulation, heart rate, pericardial area (a biomarker for cardiac looping defects), and intersegmental vessel area within freshly hatched live embryos. After optimizing 72 hpf anesthetization procedures, we evaluated each end point across four independent control plates containing 384 initial embryos per plate. Survival and imaging success rates across these plates ranged from 93 to 99% and 42 to 74%, respectively. Criteria were then defined for assay success and analysis of treatments, and 10 chemicals were screened for targeted effects on cardiovascular function. Compared to existing zebrafish-based assays, this method provides a comprehensive discovery platform with (1) increased sample sizes; (2) broad concentration-response format; and (3) the ability to identify chemicals that target cardiovascular function at nonteratogenic concentrations.

Adverse outcome pathways during zebrafish embryogenesis: a case study with paraoxon.

Using paraoxon as a reference acetylcholinesterase (AChE) inhibitor, the objective of this study was to develop an adverse outcome pathway (AOP) that provided quantitative linkages across levels of biological organization during zebrafish embryogenesis. Within normal zebrafish embryos, we first demonstrated that ache transcripts and AChE activity increased in a stage-dependent manner following segmentation. We then showed that static exposure of embryos to paraoxon (31.2-500 nM) from 5 to 96 hpf resulted in significant stage- and concentration-dependent AChE inhibition, albeit these effects were fully reversible within 48 h following transfer to clean water. However, even in the presence of significant AChE inhibition, exposure to non-teratogenic paraoxon concentrations (≤250 nM) did not adversely impact secondary motoneuron development at 96 hpf. Therefore, we investigated the potential effects of paraoxon exposure on spontaneous tail contractions at 26 hpf - an early locomotor behavior that results from innervation of primary (not secondary) motoneuron axons to target axial muscles. Based on these studies, the frequency of spontaneous tail contractions at 26 hpf - a developmental stage with minimal AChE expression and activity - was significantly higher following exposure to paraoxon concentrations as low as 31.2 nM. Overall, our data suggest that (1) normal AChE activity is not required for secondary motoneuron development and (2) spontaneous tail contractions at 26 hpf are sensitive to paraoxon exposure, an effect that may be independent of AChE inhibition. Using a well-studied reference chemical, this study highlights the potential challenges in developing quantitative AOPs to support chemical screening and prioritization strategies.